Product ID:SCOTCH WELD 2216 GRAY EPOXY ADHESIVE PT A
MSDS Date:03/11/1988
FSC:1615
NIIN:00-895-5408
Kit Part:Y
MSDS Number: BJMFL

3M

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 0F0U5

SIKORSKY AIRCRAFT

CIRENCESTER GLOS GL7 2AG, MN 55144-1000 UK

Telephone: NONE

Cage: 3G066

AMIDE

Fraction By Weight: 60-70%

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 30-40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.1-1.0%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:EXTREMELY IRRITATING UPON DIRECT
CONTACT. DUST FROM GRINDING, SANDING, CUTTING OPERATIONS ON CURED
MATERIAL MAY CAUSE EYE IRRITATION. SKIN:MAY CAUSE IRRITATION UPON
PROLONGED CONTACT. MAY CAUSE AN ALLERGIC REACTION IN CERTAIN
INDIVIDUALS. INHAL:VAPORS MAY BE IRRITATING TO RESPIRATORY SYSTEM.
(SEE EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:CARBON BLACK:CLASS 2B (IARC)
Effects of Overexposure:HLTH HAZ:DUST FROM GRINDING, SANDING OR CUTTING
OPERATIONS ON CURED MATERIAL MAY CAUSE RESPIRATORY SYSTEM
IRRITATION. INGEST:MAY CAUSE DIGESTIVE SYSTEM IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN.
CALL MD. SKIN:THOROUGHLY WASH AFFECTED AREA WITH SOAP AND WATER.
INHAL:REMOVE PERSON TO UNCONTAMINATED AIR. INGEST:DRINK TWO GLASSES
OF MILK OR WATER. CALL MD OR POISON CONTROL CENTER.

Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT WHEN
FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE AREA. COLLECT SPILLED MATERIAL,
CLEANUP RESIDUE USING ABSORBENT MATERIAL AS NEEDED. PLACE IN U.S.
DOT APPROVED METAL CONTAINER AND SEAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PREVENT CONTACT W/EYES; WEAR SAFETY
GOGGLES WHEN HANDLING PRODUCT. AVOID CONTACT W/SKIN; WEAR
IMPERVIOUS GLOVES. USE ONLY IN WELL VENT(SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC:AREAS. AVOID BREATHING VAPORS DURING
HANDLING & CURE; VENT CURING OVENS TO OUTDOORS. REMOVE CONTAMINATED
CLOTHING AND LAUNDER BEFORE REUSE. AVOID EYE CONTACT WITH OR
BREATHING OF DUST. KEEP CONTAINER CLOSED WHEN NOT IN USE.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:VENTILATE AREA WELL.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
WASTE DISP:FULLY CURED RESIDUAL MATERIAL AND EMPTY CONTAINERS MAY BE
DISPOSED IN A SANITARY LANDFILL PER REGULATIONS.

Spec Gravity:1.26
Solubility in Water:NOT SOLUBLE
Appearance and Odor:GRAY PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2, N AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Waste Disposal Methods:TWO PART SYSTEM:COMBINED PARTS (B & A),WHEN
FULLY CURED, MAY BE DISPOSED IN SANITARY LANDFILL I/A/W FEDERAL,
STATE AND LOCAL REGS. MAJOR SPILLS:DISPOSE OF CLEANUP MATL BY
INCINERATION IN INDUSTRIAL/CO MMERCIAL INCINERATORY. (SEE SUPP
DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.